The CIMCORE ARM with external scanner is a premium portable CMM for uncompromising scanning requirements.
3D digitizing, 3D modelling, point cloud inspection, reverse engineering, rapid prototyping or copy milling are the most frequent laser scanner applications and with the CIMCORE ARM, these tasks go mobile.
7-Axis Probing Specifications – 73 series
|
Model |
Measuring Range |
Probing Point
Repeatability1 |
Probing Volumetric Accuracy2 |
Arm weights SE |
|
7320SE |
2.0 m / 6.6 ft. |
0.044 mm / 0.0017 in. |
± 0.061 mm / 0.0024 in. |
7.9 kg / 17.4 lbs |
|
7325SE |
2.5 m / 8.2 ft. |
0.049 mm / 0.0019 in. |
± 0.069 mm / 0.0027 in. |
8.2 kg / 18.1 lbs |
|
7330SE |
3.0 m / 9.8 ft. |
0.079 mm / 0.0031 in. |
± 0.100 mm / 0.0039 in. |
8.5 kg / 18.7 lbs |
|
7335SE |
3.5 m / 11.5 ft. |
0.099 mm / 0.0039 in. |
± 0.125 mm / 0.0049 in. |
8.8 kg / 19.4 lbs |
|
7340SE |
4.0 m / 13.1 ft. |
0.115 mm / 0.0045 in. |
± 0.151 mm / 0.0059 in. |
9.1 kg / 20.1 lbs |
|
7345SE |
4.5 m / 14.8 ft. |
0.141 mm / 0.0056 in. |
± 0.179 mm / 0.0070 in. |
9.4 kg / 20.7 lbs |
7-Axis Probing Specifications – 75 series
|
Model |
Measuring Range |
Probing Point
Repeatability1 |
Probing Volumetric Accuracy2 |
Arm weights SE |
|
7520SE |
2.0 m / 6.6 ft. |
0.023 mm / 0.0009 in. |
± 0.033 mm / 0.0013 in. |
8.2 kg / 18.1 lbs |
|
7525SE |
2.5 m / 8.2 ft. |
0.027 mm / 0.0011 in. |
± 0.038 mm / 0.0015 in. |
8.5 kg / 18.7 lbs |
|
7530SE |
3.0 m / 9.8 ft. |
0.042 mm / 0.0017 in. |
± 0.058 mm / 0.0023 in. |
8.8 kg / 19.4 lbs |
|
7535SE |
3.5 m / 11.5 ft. |
0.055 mm / 0.0022 in. |
± 0.081 mm / 0.0032 in. |
9.1 kg / 20.1 lbs |
|
7540SE |
4.0 m / 13.1 ft. |
0.067 mm / 0.0026 in. |
± 0.098 mm / 0.0039 in. |
9.4 kg / 20.7 lbs |
|
7545SE |
4.5 m / 14.8 ft. |
0.084 mm / 0.0033 in. |
± 0.119 mm / 0.0047 in. |
9.7 kg / 21.4 lbs |
All specifications according to B89.4.22 and VDI/VDE 2617-9
1 The Point Repeatability Test is the reference test to determine measurement arm repeatability with ball probe. The cone is in front of the machine. Points are measured from multiple approach directions. The average point and the deviation of each point to the average center are calculated. The result is the maximum range divided by two.
2 The Volumetric Accuracy Test most accurately represents the reasonable expectations for machine performance in practical measuring applications since it involves measuring a certified length standard many times in several locations and orientations and compares the resultant measurements to the actual length. The Volumetric Length Accuracy Test is the most appropriate test for determining machine accuracy and repeatability. The result is the maximum deviation of the measuring distance less the theoretical length.
All probing specifications are achieved with a CIMCORE ARM mounted on a CIMCORE base plate or magnetic base and using a 15 mm steel ball probe with a length of 50 mm under stable environmental conditions.
Print
